LT3796IFE-1
| Parameters | |
|---|---|
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | True Color PWM™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~1MHz |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Number of Outputs | 1 |
| Output Voltage | 7.7V |
| Input Voltage-Nom | 24V |
| Input Voltage (Min) | 6V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Current - Output / Channel | 10A |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 100V |
| Voltage - Supply (Min) | 6V |
LT3796IFE-1 Overview
In order to save board space, the led driver uses the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. LED drivers designed using this technology use 1 outputs.The mounting method adopted is Surface Mount.When it emerges as a DC DC Controller, it shows high-performance and reliability.-40°C~125°C TJ is the operating temperature of the led driver.The system operates on the basis of the frequency 100kHz~1MHz.It is designed to work with 28 terminations.It is possible for undetermined failures to occur if the voltage supply is lower than 6V.The device has 28 pins.The supply voltage is optimized to offer a maximum value of 100V.Several applications make use of this LED driver from the True Color PWM? series.The output voltage is 7.7V.While operating the device, the circuit has 24V volts.Working with an input voltage higher than or equal to 6V brings great convenience to its operation.
LT3796IFE-1 Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
Output voltage of 7.7V
LT3796IFE-1 Applications
There are a lot of Linear Technology/Analog Devices LT3796IFE-1 LED Driver ICs applications.
- Refrigeration lighting
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- High-end retail lighting
- Street lighting
- A- lamps
- Panel lighting
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
