LT3796IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | True Color PWM™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~1MHz |
| Base Part Number | LT3796 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Output Voltage | 7.7V |
| Input Voltage-Nom | 24V |
| Output Current | 10A |
| Input Voltage (Min) | 6V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Switching Frequency | 100kHz |
| Voltage - Supply (Max) | 100V |
| Voltage - Supply (Min) | 6V |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3796IFE#PBF Overview
The 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used for saving board space. A LED driver using this design has 1 outputs.Surface Mount is used to mount the led light driver.It emerges as a DC DC Controller, which is efficient and reliable.The led light driver is capable of operating at the operating temperature of -40°C~125°C TJ.As a result, it operates in accordance with the frequency of 100kHz~1MHz.In this case, the termination value is 28.It has a base of 28 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 6V.It's under the LT3796 base part number.There are 28 pins on it.An optimal value of supply voltage is 100V.You can supply 10A current to the load.When the switching frequency is maintained at 100kHz, this electronic component is able to fully play its functions.LED drivers belonging to the True Color PWM? series are used in a wide variety of applications.The voltage at the output terminal is 7.7V.There are 24V volts assigned to the circuit when operating the device.When its input voltage exceeds 6V, its operation is convenient.
LT3796IFE#PBF Features
Available in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
Switching frequency of 100kHz
Output voltage of 7.7V
LT3796IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3796IFE#PBF LED Driver ICs applications.
- Stage and Studio lighting
- Panel lighting
- Architectural lighting
- Other Electronic Devices
- Amusement Machines
- LED Lightings for Inspection Devices
- High-end retail lighting
- Replacement lamps
- A- lamps
- Dimmable LED for vehicle interiors
