LT3840EFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3840 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.5V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 2.5V~60V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Max Output Voltage | 60V |
| Topology | Buck |
| Min Input Voltage | 2.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Max Input Voltage | 60V |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.5V |
| Max Duty Cycle | 99 % |
| Length | 9.7mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3840EFE#PBF Overview
Capsuled in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. dc motor controller is suitable for 1 output generation. A solid enclosure of Tube surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 2.5V~60V. Work well in dc switchers with a -40°C~125°C TJ. It can switch at 50kHz~1MHz. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 28. A search for "LT3840" will reveal other relevant dc to dc converter ics. The switching converter has a total of 28 pins. DC regulator outputs 1.5V voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 30A. A duty cycle set at 99 % ensures voltage regulator dc to dc reliability during power-on and power-off. The maximum input voltage of dc switcher is 60V, so users should limit their voltage accordingly. In order to use a 2.5V voltage supply, switching controller is necessary to have one. As per its datasheet, the switching converter has a maximum output of 60V volts. Its lowest voltage output is not less than 1.5V.
LT3840EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
Max Duty Cycle: 99 %
LT3840EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3840EFE#PBF DC to DC converter applications.
- Medical equipment
- Automatic plug-in machines
- Product burn-in
- Pipe bending machines
- Direct power supply system
- Plate bending machines
- Television equipment
- Injection molding machinery
- Telecommunications equipment
- Window air conditioners
