LT3956EUHE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 36-WFQFN, 28 Leads, Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | True Color PWM™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 36 |
| JESD-30 Code | R-PBCC-B28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 24V |
| Input Voltage (Min) | 4.5V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 4.6A |
| Input Voltage (Max) | 80V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Current - Output / Channel | 3.3A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 80V |
| Voltage - Supply (Min) | 4.5V |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
LT3956EUHE Overview
36-WFQFN, 28 Leads, Exposed Pad package saves space on the board. Typically, LED drivers have 1 outputs.The mounting method adopted is Surface Mount.It emergys as a DC DC Regulator with high efficiency and reliable performance.-40°C~125°C TJ is a valid operating temperature for the led driver.A frequency of 100kHz~1MHz is used to operate it.A termination of 28 is used to operate the LED driver.It is possible for undetermined failures to occur if the voltage supply falls below 4.5V.A device with 36 pins is available.Supply voltage can be set to a maximum value of 80V.This LED driver belonging to the True Color PWM? series is a key component for a broad range of applications.When operating the device, 24V volts are assigned to the circuit.Operation is greatly facilitated when the input voltage exceeds or equals 4.5V.Moreover, this LED driver is characterized by ALSO OPERATES AS LDO REGULATOR.High stability can be ensured when the input voltage is kept below 80V.It should not exceed 4.6A in terms of output current.
LT3956EUHE Features
Available in the 36-WFQFN, 28 Leads, Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
ALSO OPERATES AS LDO REGULATOR
LT3956EUHE Applications
There are a lot of Linear Technology/Analog Devices LT3956EUHE LED Driver ICs applications.
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Linear fluorescent
- Other Electronic Devices
- General lighting
- Sports Facility Lighting
- Auxiliary lights for on-vehicle cameras
- Industrial LED Lighting: Image Recognition Devices
- Street lighting
