LT3956EUHE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFQFN, 28 Leads, Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3956 |
| Pin Count | 36 |
| JESD-30 Code | R-PQCC-N36 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 24V |
| Input Voltage (Min) | 4.5V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 4.6A |
| Input Voltage (Max) | 80V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Current - Output / Channel | 3.3A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 80V |
| Voltage - Supply (Min) | 4.5V |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LT3956EUHE#TRPBF Overview
Space is saved using its 36-WFQFN, 28 Leads, Exposed Pad package. LED drivers with this design have 1 outputs.Mounting is done according to the Surface Mount method.DC DC Regulator emerges with high efficiency and reliability.The LED driver is capable of operating at a temperature of -40°C~125°C TJ.As a result, it operates on the basis of frequency 100kHz~1MHz.A termination of 36 is used to operate the LED driver.It is inevitable that there will be undetermined failures when the supply voltage is less than 4.5V.Under the base part number LT3956, you will find this LED driver.It is equipped with 36 pin count.This device is optimized to deliver a maximum voltage level of 80V.Device operation requires 24V volts from the circuit.It works well when the input voltage is higher than 4.5V.In addition, this LED driver has a ALSO OPERATES AS LDO REGULATOR characteristic.High stability can be ensured when the input voltage is kept below 80V.It is important that the output current is not greater than 4.6A.
LT3956EUHE#TRPBF Features
Available in the 36-WFQFN, 28 Leads, Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
ALSO OPERATES AS LDO REGULATOR
LT3956EUHE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3956EUHE#TRPBF LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Architectural lighting
- Dimmable LED for vehicle interiors
- Down lighting
- LED Lighting PFCs, Linear Dimmable
- High-end retail lighting
- A- lamps
- Medical surgery lighting
- OLED power supply for portable equipment
