LT3971IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3971 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 38V |
| Output Voltage | 30V |
| Output Type | Adjustable |
| Max Output Current | 1.2A |
| Voltage - Input (Min) | 4.3V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 30V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.19V |
| Voltage - Output (Max) | 30V |
| Height | 700μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT3971IDD#PBF Overview
optimized performance is achieved by utilizing the Tube package in this voltage regulator. In this voltage regulator, 10 terminations are present. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this voltage regulator is packaged in the 10-WFDFN Exposed Pad package. The voltage regulator 12v has 1 outputs. The adjusting voltage regulator generates Adjustable output. Surface Mount-mount switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. This voltage regulator 12v reaches a switching frequency of 200kHz~2MHz. Input voltage 4.3V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. There is a voltage regulator maximum input voltage of 38V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. An input voltage of 12V is required to meet the requirements of the switching regulator operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. There is a DC/DC regulator in this family that belongs to the LT3971 family. There is a possibility that DC DC switching regulator can give voltage at 30V volts. There are 10 pins used for switching regulator operation. For this switching regulator, it is recommended that the output voltage is at least 1.19V volts. Accordingly, dc to dc voltage regulator's maximum output current is 1.2A A. DC DC switching regulator is able to operate in an easy way on the basis of the maximal output voltage of 30V. DC DC switching regulator offers a maximum output voltage of 30V as its maximum output voltage.
LT3971IDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LT3971IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3971IDD#PBF Voltage Regulators applications.
- Radio equipment
- Textile machinery
- Network technology
- Solar power plants
- Household control circuits
- CMM
- Program control systems
- USB circuits
- Experimental setup
- Motor controller circuits
