Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
10-WFDFN Exposed Pad |
Surface Mount |
YES |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LT3990 |
Function |
Step-Down |
Number of Outputs |
1 |
Voltage - Input (Max) |
62V |
Output Voltage |
3.3V |
Output Type |
Adjustable |
Voltage - Input (Min) |
4.2V |
Input Voltage-Nom |
12V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
350mA |
Voltage - Output (Min/Fixed) |
1.21V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
210kHz~2.3MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Voltage - Output (Max) |
25V |
Height Seated (Max) |
0.8mm |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
LT3990IDD#PBF Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 10 terminations were made. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. For space-saving purposes, this voltage regulator is available in the 10-WFDFN Exposed Pad package. 1 outputs of voltage regulator are configured. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. The switching frequency of this DC-DC switching regulator reaches 210kHz~2.3MHz. This voltage regulator is able to operate with the minimal input voltage of 4.2V. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 1.21V. Featuring a maximum design flexibility of 350mA, dc to dc voltage regulator has a maximum output current of 350mA. There is a maximum input voltage of 62V for this voltage regulator 12v. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 12V is provided. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. This DC/DC regulator belongs to the LT3990 family. A voltage of 3.3V volts can be produced by voltage regulator. 25V's maximal output voltage allows adjusting voltage regulator to operate easily.
LT3990IDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
LT3990IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3990IDD#PBF Voltage Regulators applications.
- Large fire protection systems
- Wide-range voltage regulation circuits
- Plate bending machines
- Smoke prevention equipment
- Low output voltage switching power supply circuits
- Industrial controllers
- Smart grid
- Television equipment
- Energy management systems
- ATMs