LT4250LCN8
| Parameters | |
|---|---|
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 48V |
| Supply Voltage-Min (Vsup) | 20V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 5mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Latched Fault, OVP, UVLO |
| Feature Pins | DRAIN, /PWRGD, OV, UV |
| Height Seated (Max) | 3.937mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Feature | Fault Timeout |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LT4250 |
LT4250LCN8 Overview
In the 8-DIP (0.300, 7.62mm) package you will find it.Hot-swappable device is currently possible to access 1 channels.The package resembles a Tube.Total terminations are 8.The terminal position of the device is DUAL.Hot-swappable device has a total of 8 pins on Hot-swappable device.High efficiency can be achieved with a voltage supply of 48V.Through Hole is set up this way.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.There are -48V applications available for the device.Fault Timeout features it.Hot-swappable device should be able to work wHot-swappable deviceh a power source of -80V~18VV.LT4250 numbers belong to this family.This gadget is self-contained in?Power Management Circuits.Current Limit, Latched Fault, OVP, UVLO is the number of features it can be programmed with.Presently, there is a sufficient supply of 1.6mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 20V so that the device can function normally.Hot-swappable device is set to 80V for the maximum supply voltage.Part 48V is associated with power supplies.Its maximum supply current for operation is 5mA.
LT4250LCN8 Features
The terminal position of 8
Features of Fault Timeout
Programmable features of Current Limit, Latched Fault, OVP, UVLO
LT4250LCN8 Applications
There are a lot of Linear Technology/Analog Devices LT4250LCN8 hot swap controllers applications.
- Disconnect faulty loads before supply voltage drops
- Industrial application
- Avionics systems
- Short-circuit protection in real time
- Automotive circuits
- Reverse current protection
- Network switches
- Microcontrollers
- Data communication systems
- Server backplane system
