LT6001CDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6001 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 1.8/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 20μA |
| Supply Current-Max | 0.048mA |
| Slew Rate | 0.018V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~16V ±0.9V~8V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 60kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6001CDD#PBF Overview
Packaged in a 10-WFDFN Exposed Pad case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 10 terminations this year. It consists of a total of 10 pins in total. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 10 pins are available on the instrumentation amplifier. Op amp rates 500μV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. A supply current of 20μA can be used to operate this linear amplifier. 120dB should remain the voltage gain. This op amp ic has 2 circuits. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
LT6001CDD#PBF Features
10 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LT6001CDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6001CDD#PBF Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Communication device
- Industrial control system
- Hand-held batteries
- Weighing systems
- Gaming industry
- Radiation thermometry transducers
- Portable media players
- Vehicle electronics
- Signal filtering
