LT6001CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6001 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 20μA |
| Slew Rate | 0.018V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~16V ±0.9V~8V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 600μV |
| Gain Bandwidth Product | 60kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Micropower | YES |
| Nominal Gain Bandwidth Product | 50 kHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LT6001CMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 1.8V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 600μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . Using an 20μA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 120dB. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2.
LT6001CMS8#PBF Features
8 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LT6001CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6001CMS8#PBF Instrumentational OP Amps applications.
- Laptop
- Signal transformation
- Comparator
- Wireless base stations
- Cinema or auditorium audio system
- Scintillation detectors
- Thermocouples
- Communication
- Digital cameras
- Signal filtering
