LT6001IDD#PBF
| Parameters | |
|---|---|
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Micropower | YES |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6001 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 1.8/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 20μA |
| Supply Current-Max | 0.054mA |
| Slew Rate | 0.018V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~16V ±0.9V~8V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 60kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
LT6001IDD#PBF Overview
In order to protect the op amps, a 10-WFDFN Exposed Pad case is used. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. A total of 10 terminations have been reported in the past few weeks. In total, there are 10 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 10 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 500μV voltage. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using an 20μA supply current, this operational amplifier ics can be operated. Op amp is a member of the 120dB's 120dB family. This op amp contains 2 circuits. On the output type, there are Rail-to-Rail different types of op amps.
LT6001IDD#PBF Features
10 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LT6001IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6001IDD#PBF Instrumentational OP Amps applications.
- Signal amplification
- Video conversion and routing
- Addition operation circuits
- Mobile phone
- Home audio systems
- Inverse/same-phase proportional circuit
- Proportional operation circuits
- Micro signal measurement
- Proportional counter tubes
- ECG equipment
