LT6001IMS8#PBF

2 Channels 10mA per Channel 4nA 68 dB Instrumentational OP Amps MSOP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6001IMS8#PBF
Package: MSOP
Datasheet: PDF
Stock: 233
Description: 2 Channels 10mA per Channel 4nA 68 dB Instrumentational OP Amps MSOP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Package / Case	MSOP
Number of Pins	8
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	18V
Min Supply Voltage	1.8V
Operating Supply Current	20μA
Slew Rate	0.015 V/μs
Common Mode Rejection Ratio	68 dB
Current - Input Bias	4nA
Output Current per Channel	10mA
Input Offset Voltage (Vos)	600μV
Bandwidth	50 kHz
Gain Bandwidth Product	60 kHz
Voltage Gain	120dB
Power Supply Rejection Ratio (PSRR)	86dB
Nominal Gain Bandwidth Product	50 kHz
Number of Amplifiers	2
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT6001IMS8#PBF Overview

A MSOP case is used to package the op amp. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 600μV. The buffer amplifier is capable of operating from a supply current of 20μA . Voltage gain should remain at 120dB. On this instrumentation amplifier, there are 2 circuits that are connected together. Op amp ic has 2 channels. For this linear amplifier to work, the temperature should not be below -40°C. Use op amps only at temperatures no higher than 85°C. The op amp is rated for an operating supply voltage of 2. It is important to keep in mind that the power supply voltage of this electric component is below 18V, which is suitable. As a general rule, it is advisable to keep the op amp's supply voltage above 1.8V at all times. A linear amplifier such as this has 2 amplifiers on it.