LT6001IMS8#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 20μA |
| Slew Rate | 0.015 V/μs |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 4nA |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 600μV |
| Gain Bandwidth Product | 60 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Nominal Gain Bandwidth Product | 50 kHz |
| RoHS Status | RoHS Compliant |
LT6001IMS8#TRPBF Overview
Packaging for the buffer amplifier is in the form of a MSOP case. 8 pins are available on the instrumentation amplifier. Op amp ic rates 600μV for input offset voltage. As long as the supply current of the chip does not exceed 20μA, this op amp ic can operate. The voltage gain should stay at 120dB. There are 2 circuits on op amps. As far as the device is concerned, buffer amplifier has 2 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. You should not use op amp above 85°C . The linear amplifier consists of 2 different elements in total. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 18V, and this is an excellent feature. As a general rule, it is advisable to keep the op amp's supply voltage above 1.8V at all times.
LT6001IMS8#TRPBF Features
120dB voltage gain
LT6001IMS8#TRPBF Applications
There are a lot of Analog Devices, Inc. LT6001IMS8#TRPBF Instrumentational OP Amps applications.
- High speed sample
- Voltage regulation circuit
- Automotive sensors
- Image computer boards
- Weighing systems
- Automatic control
- Subtraction operation circuits
- Large motor controllers
- Broadcasting
- Oscilloscopes
