LT6002CGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6002 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.8/5V |
| Operating Supply Current | 20μA |
| Supply Current-Max | 0.096mA |
| Slew Rate | 0.018V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~16V ±0.9V~8V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 750μV |
| Gain Bandwidth Product | 60kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 500μV |
| Micropower | YES |
| Nominal Gain Bandwidth Product | 50 kHz |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6002CGN#PBF Overview
The linear amplifier is packaged in a 16-SSOP (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 16. A total of 16 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 1.8V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 16 pins are present on the instrumentation amplifier. Op amp rates 750μV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 20μA and 10 . 120dB should be the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. A voltage rating of 4 is indicated for the op amp's operating supply voltage.
LT6002CGN#PBF Features
16 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LT6002CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6002CGN#PBF Instrumentational OP Amps applications.
- Switching amplifier
- Power transmission
- Power control
- Logarithmic operation circuits
- Gaming industry
- Automatic control
- Signal filtering
- Multimedia playback equipment
- Mobile phone
- Comparator
