LT6002IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6002 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 1.8/5V |
| Number of Channels | 4 |
| Operating Supply Current | 20μA |
| Supply Current-Max | 0.108mA |
| Slew Rate | 0.018V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~16V ±0.9V~8V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 60 kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 500μV |
| Micropower | YES |
| Nominal Gain Bandwidth Product | 50 kHz |
| Height Seated (Max) | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT6002IGN#PBF Overview
A 16-SSOP (0.154, 3.90mm Width) case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. A total of 16 terminations have been reported in the past few weeks. In total, there are 16 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 16 pins. Op amp rates 750μV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 20μA . The voltage gain should stay at 120dB. Instrumentation amplifier has 4 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers.
LT6002IGN#PBF Features
16 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LT6002IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6002IGN#PBF Instrumentational OP Amps applications.
- Car stereo
- Signal operation
- Home audio systems
- PDA
- Cinema or auditorium audio system
- Automation control systems
- ECG equipment
- Vehicle electronics
- Video conversion and routing
- Wireless base stations
