LT6003HS5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 8V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6003 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1.25μA |
| Supply Current-Max | 0.003mA |
| Slew Rate | 0.0013V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 40pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~16V ±0.8V~8V |
| Output Current per Channel | 9mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 3kHz |
| Neg Supply Voltage-Nom (Vsup) | -8V |
| Voltage Gain | 86.02dB |
| Average Bias Current-Max (IIB) | 0.006μA |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 185μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -9V |
| Nominal Gain Bandwidth Product | 2 kHz |
| Wideband | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
LT6003HS5#TRPBF Overview
Op amp is packaged in SOT-23-5 Thin, TSOT-23-5 case. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 5. A total of 5 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 8V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 5 pins. There is an input offset voltage of 500μV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureA supply current of 1.25μA can be used to operate this linear amplifier. Keeping the voltage gain at 86.02dB is the best course of action. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The linear amplifier consists of 1 different elements in total. This linear amplifier pack is based on the TAPE AND REEL axis.
LT6003HS5#TRPBF Features
5 Pins
supply voltage of 8V
86.02dB voltage gain
Output Type: Rail-to-Rail
LT6003HS5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6003HS5#TRPBF Instrumentational OP Amps applications.
- Power generator
- Switching amplifier
- Laptop
- Signal filtering
- Television
- PDA
- Portable media players
- Communication
- Hand-held batteries
- Medical imaging
