LT6004CMS8#TRPBF

2 Channels 9mA per Channel 40pA 72 dB Instrumentational OP Amps MSOP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6004CMS8#TRPBF
Package: MSOP
Datasheet: PDF
Stock: 435
Description: 2 Channels 9mA per Channel 40pA 72 dB Instrumentational OP Amps MSOP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	MSOP
Number of Pins	8
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	16V
Min Supply Voltage	1.6V
Operating Supply Current	1.25μA
Slew Rate	0.0008 V/μs
Common Mode Rejection Ratio	72 dB
Current - Input Bias	40pA
Output Current per Channel	9mA
Input Offset Voltage (Vos)	500μV
Gain Bandwidth Product	2 kHz
Voltage Gain	113.98dB
Power Supply Rejection Ratio (PSRR)	80dB
Max Dual Supply Voltage	8V
Min Dual Supply Voltage	800mV
Nominal Gain Bandwidth Product	2 kHz
RoHS Status	RoHS Compliant

LT6004CMS8#TRPBF Overview

In the package, you will find a MSOP-case to contain the op amp ic. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 500μV. The buffer amplifier is capable of operating from a supply current of 1.25μA . There should be no change in the voltage gain at 113.98dB. There are 2 circuits on this op amp. There are a total of 2 channels available on the op amps. It should not lower than 0°C to operate buffer amplifier. At temperatures greater than 70°C, op amp should not be used. The op amp is rated for an operating supply voltage of 2. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 16V. It is advised to keep the op amp's supply voltage higher than 1.6V. It is recommended that you conduct this electronic part using the dual supply voltage of 8V.