LT6005HGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 8V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6005 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Operating Supply Current | 1.25μA |
| Supply Current-Max | 0.003mA |
| Slew Rate | 0.0013V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 40pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~16V ±0.8V~8V |
| Output Current per Channel | 9mA |
| Input Offset Voltage (Vos) | 650μV |
| Gain Bandwidth Product | 3kHz |
| Neg Supply Voltage-Nom (Vsup) | -8V |
| Voltage Gain | 86.02dB |
| Average Bias Current-Max (IIB) | 0.012μA |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -9V |
| Nominal Gain Bandwidth Product | 2 kHz |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
LT6005HGN#PBF Overview
The linear amplifier is packaged in a 16-SSOP (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. The number of terminations approaches 16. Buffer amplifier has a total of 16 pins. Please take in mind that op amp should be run at 8V. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 16 pins. Regarding input offset voltage, buffer amplifier rates 650μV voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Operational amplifier can operate supply current at 1.25μA. There should be no change in the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. There is a rating of 4 for the operating supply voltage of the buffer op amp.
LT6005HGN#PBF Features
16 Pins
supply voltage of 8V
86.02dB voltage gain
Output Type: Rail-to-Rail
LT6005HGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6005HGN#PBF Instrumentational OP Amps applications.
- Industrial applications including automation
- Portable media players
- Integrator circuits
- Non-polarized electrodes
- Television
- Addition operation circuits
- Industrial control system
- Digital cameras
- Weighing systems
- High input resistance broadband
