LT6005IGN#TRPBF

4 Channels 9mA per Channel 40pA 72 dB Instrumentational OP Amps SSOP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6005IGN#TRPBF
Package: SSOP
Datasheet: PDF
Stock: 348
Description: 4 Channels 9mA per Channel 40pA 72 dB Instrumentational OP Amps SSOP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	SSOP
Number of Pins	16
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	4
Number of Channels	4
Number of Circuits	4
Max Supply Voltage	16V
Min Supply Voltage	1.6V
Operating Supply Current	1.25μA
Slew Rate	0.0008 V/μs
Common Mode Rejection Ratio	72 dB
Current - Input Bias	40pA
Output Current per Channel	9mA
Input Offset Voltage (Vos)	650μV
Gain Bandwidth Product	2 kHz
Voltage Gain	113.98dB
Power Supply Rejection Ratio (PSRR)	78dB
Max Dual Supply Voltage	8V
Min Dual Supply Voltage	800mV
Nominal Gain Bandwidth Product	2 kHz
RoHS Status	RoHS Compliant

LT6005IGN#TRPBF Overview

In order to protect the op amps, a SSOP case is used. The op amp ic has an array of 16 pins on it. Op amp ic rates 650μV for input offset voltage. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.25μA and 10 . There should be no change in the voltage gain. This op amp contains 4 circuits. As far as the device is concerned, buffer amplifier has 4 channels. The temperature should not be lower than -40°C for operational amplifier ics to operate. A temperature greater than 85°C should not be used for the operation of buffer amplifier. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. I would like to point out that this electrical component is capable of working from a voltage below 16V as far as the power supply is concerned. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 1.6V when using it. This electrical part should be conducted under the dual supply voltage of 8V volts when you conduct this part.