LT6011ACS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 260μA |
| Slew Rate | 0.09 V/μs |
| Common Mode Rejection Ratio | 107 dB |
| Current - Input Bias | 20pA |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 60μV |
| Bandwidth | 330 kHz |
| Gain Bandwidth Product | 330 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 112dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 330 kHz |
| Number of Amplifiers | 2 |
| Height | 1.498mm |
| Length | 5mm |
| Width | 3.988mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LT6011ACS8#PBF Overview
A SOIC case is used to package the op amp. 8 pins are located on the operational amplifiers. The input offset voltage is 60μV. This op amp can operate from a supply current at 260μA. You should keep the voltage gain at 126.02dB for the time being. A instrumentation amplifier like this has 2 circuits. 2 channels are available on the instrumentation amplifier. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 70°C. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of instrumentation amplifier is rated 5V voltage. With regard to the supply voltage, this electrical component is capable of working from under 40V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.4V when using it. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. As you can see, the linear amplifier has 2 amplifiers.
LT6011ACS8#PBF Features
126.02dB voltage gain
LT6011ACS8#PBF Applications
There are a lot of Analog Devices, Inc. LT6011ACS8#PBF Instrumentational OP Amps applications.
- Power generator
- Industrial applications including automation
- Professional videography
- Band-pass filter
- Differentiator circuits
- Semiconductor detectors
- Television
- Industrial control system
- Biopotential
- Proportional operation circuits
