LT6012CGN#PBF

4 Channels 20mA per Channel 150pA 107 dB Instrumentational OP Amps SSOP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6012CGN#PBF
Package: SSOP
Datasheet: PDF
Stock: 737
Description: 4 Channels 20mA per Channel 150pA 107 dB Instrumentational OP Amps SSOP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Package / Case	SSOP
Number of Pins	16
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	4
Number of Channels	4
Number of Circuits	4
Max Supply Voltage	40V
Min Supply Voltage	2.4V
Operating Supply Current	260μA
Slew Rate	0.09 V/μs
Common Mode Rejection Ratio	107 dB
Current - Input Bias	150pA
Output Current per Channel	20mA
Input Offset Voltage (Vos)	60μV
Gain Bandwidth Product	330 kHz
Voltage Gain	126.02dB
Power Supply Rejection Ratio (PSRR)	112dB
Max Dual Supply Voltage	18V
Min Dual Supply Voltage	1.35V
Nominal Gain Bandwidth Product	330 kHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT6012CGN#PBF Overview

It is packaged in an SSOP-case that protects the operational amplifiers from damage. A total of 16 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 60μV. An 260μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 126.02dB. During the manufacturing process, this buffer amplifier is divided into 4 circuits. Instrumentation amplifier has 4 channels on it. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. Linear amplifier shouldn't be used above 70°C degrees. This linear amplifier has a total of 4 elements. I would like to point out that this electrical component is capable of working from a voltage below 40V as far as the power supply is concerned. A voltage of 2.4V or higher is recommended for the linear amplifier's supply voltage. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.