LT6012CS#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 260μA |
| Slew Rate | 0.09 V/μs |
| Common Mode Rejection Ratio | 107 dB |
| Current - Input Bias | 900pA |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 60μV |
| Bandwidth | 330 kHz |
| Gain Bandwidth Product | 330 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 112dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 330 kHz |
| Number of Amplifiers | 4 |
| Height | 1.48mm |
| Length | 8.74mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT6012CS#PBF Overview
The linear amplifier is packaged in a SOIC case. It has 14 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 60μV. Using an 260μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 126.02dB. On this instrumentation amplifier, there are 4 circuits that are connected together. There are a total of 4 channels available on the op amps. The temperature should not be lower than 0°C for operational amplifier ics to operate. It should only be used at temperatures up above 70°C. 4 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 28V voltage. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 40V. To keep the buffer amps' supply voltage higher than 2.4V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts. The buffer amplifier consists of 4 amplifiers.
LT6012CS#PBF Features
126.02dB voltage gain
LT6012CS#PBF Applications
There are a lot of Analog Devices, Inc. LT6012CS#PBF Instrumentational OP Amps applications.
- Communication
- Logarithmic operation circuits
- Video computer boards
- Wireless base stations
- Image computer boards
- Multimedia playback equipment
- single/dual op amp sum and difference circuits
- Industrial applications including automation
- MP3
- Test equipment
