LT6012CS#TRPBF

4 Channels 20mA per Channel 150pA 107 dB Instrumentational OP Amps SOIC

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6012CS#TRPBF
Package: SOIC
Datasheet: PDF
Stock: 443
Description: 4 Channels 20mA per Channel 150pA 107 dB Instrumentational OP Amps SOIC(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	SOIC
Number of Pins	14
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	4
Number of Channels	4
Number of Circuits	4
Max Supply Voltage	40V
Min Supply Voltage	2.4V
Operating Supply Current	260μA
Slew Rate	0.09 V/μs
Common Mode Rejection Ratio	107 dB
Current - Input Bias	150pA
Output Current per Channel	20mA
Input Offset Voltage (Vos)	60μV
Gain Bandwidth Product	330 kHz
Voltage Gain	126.02dB
Power Supply Rejection Ratio (PSRR)	112dB
Max Dual Supply Voltage	18V
Min Dual Supply Voltage	1.35V
Nominal Gain Bandwidth Product	330 kHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT6012CS#TRPBF Overview

The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. 14 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 60μV. It is possible to operate this buffer amplifier from a supply current of 260μA . Keeping the voltage gain at 126.02dB is the best course of action. The buffer amp consists of 4 circuits in total. Op amp ic has 4 channels. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. At temperatures greater than 70°C, Instrumentation amplifier should not be used. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 40V. A voltage of 2.4V or higher is recommended for the linear amplifier's supply voltage. You should conduct this electronic component under the dual supply voltage of 18V.