LT6015HS5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6015 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 325μA |
| Supply Current-Max | 0.37mA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 126 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 3V~50V ±1.5V~25V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 55μV |
| Bandwidth | 3.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3300 kHz |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 30V |
| Voltage - Input Offset | 55μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Voltage Gain-Min | 200000 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
LT6015HS5#TRPBF Overview
The linear amplifier is packaged in a SOT-23-5 Thin, TSOT-23-5 case which makes it easy for the consumer to handle. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 5 mark. Buffer amplifier has a total of 5 pins. This linear amplifier should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 5 pins. With regard to input offset voltage, instrumentation amplifier is rated at 55μV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 325μA and 10 . This op amp contains 1 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. TAPE AND REEL is adopted to pack the instrumentation amplifier. A voltage gain of 200000 is the minimum this op amp can achieve.
LT6015HS5#TRPBF Features
5 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
LT6015HS5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6015HS5#TRPBF Instrumentational OP Amps applications.
- Blood pressure sensors
- pH (acidity)
- Image computer boards
- Portable docking station
- Band-pass filter
- Subtraction operation circuits
- Biopotential
- Automation control systems
- Active probe
- Medical instruments
