LT6016MPMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT6016 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Current - Supply | 325μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 3V~50V ±1.5V~25V |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 3.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3300 kHz |
| Voltage Gain | 129.54dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 30V |
| Voltage - Input Offset | 55μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.005μA |
| Programmable Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6016MPMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. There is an input offset voltage of 50μV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -55°C~150°C , which is a good operating temperature. It is a member of the 129.54dB's 129.54dB family. A linear amplifier like this has 2 circuits on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. This electronic part is recommended to be used with an 325μA supply for best performance.
LT6016MPMS8#PBF Features
8 Pins
supply voltage of 15V
129.54dB voltage gain
Output Type: Rail-to-Rail
LT6016MPMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6016MPMS8#PBF Instrumentational OP Amps applications.
- Automatic control
- Switching amplifier
- Radiation thermometry transducers
- Large motor controllers
- Power generator
- Industrial applications including automation
- Biopotential
- Polarized electrodes
- Fast A/D and D/A converters
- Automation control systems
