LT6016MPMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT6016 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Current - Supply | 325μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 3V~50V ±1.5V~25V |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 3.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3300 kHz |
| Voltage Gain | 129.54dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 30V |
| Voltage - Input Offset | 55μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.005μA |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LT6016MPMS8#TRPBF Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 50μV. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -55°C~150°C when it comes to operating temperature129.54dB should remain the voltage gain. On this buffer amplifier, there are 2 circuits. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. This electronic part is recommended to be used with an 325μA supply for best performance.
LT6016MPMS8#TRPBF Features
8 Pins
supply voltage of 15V
129.54dB voltage gain
Output Type: Rail-to-Rail
LT6016MPMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6016MPMS8#TRPBF Instrumentational OP Amps applications.
- Medical imaging
- Image computer boards
- Multimedia playback equipment
- Power generator
- Weighing systems
- Communication
- Band-pass filter
- Home audio systems
- PDA
- Signal operation
