LT6105CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6105 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 2.85V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Supply | 240μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Current Sense |
| Voltage - Supply, Single/Dual (±) | 2.85V~36V ±1.425V~18V |
| Voltage - Input Offset | 100μV |
| Current - Output / Channel | 1mA |
| -3db Bandwidth | 100kHz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LT6105CMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. This is a Current Sense type op amp. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 12V battery. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. There are 1 circuits on op amps. To run supply current of buffer amplifier under 240μA. The other types of analog IC are as follwed ANALOG CIRCUIT.
LT6105CMS8#PBF Features
8 Pins
supply voltage of 12V
LT6105CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6105CMS8#PBF Instrumentational OP Amps applications.
- Laptop
- Displayers for aircraft and air transportation control systems
- Integrator circuits
- E-book readers
- Information processing
- Voltage regulation circuit
- Biopotential
- Signal transformation
- Automatic control
- Inverse/same-phase proportional circuit
