LT6105CMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6105 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 36V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 240μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 94 dB |
| Voltage - Supply, Single/Dual (±) | 2.85V~36V ±1.425V~18V |
| Output Current per Channel | 1mA |
| Input Offset Voltage (Vos) | 300μV |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Voltage - Input Offset | 100μV |
| Nominal Gain Bandwidth Product | 100 kHz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LT6105CMS8#TRPBF Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Current Sense-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 12V. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 300μV voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 240μA and 10 . There are 1 circuits on op amps. For the operating supply voltage of the op amp ic, there is a rating of 1. The other types of analog IC are as follwed ANALOG CIRCUIT.
LT6105CMS8#TRPBF Features
8 Pins
supply voltage of 12V
LT6105CMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6105CMS8#TRPBF Instrumentational OP Amps applications.
- Differentiator circuits
- Power generator
- Communication
- Oscilloscopes
- RF cable systems
- pH (acidity)
- Vehicle electronics
- Home audio systems
- Blood pressure sensors
- Mobile phone
