LT6105HMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6105 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 2.85V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Supply | 300μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Current Sense |
| Voltage - Supply, Single/Dual (±) | 2.85V~36V ±1.425V~18V |
| Voltage - Input Offset | 100μV |
| Current - Output / Channel | 1mA |
| -3db Bandwidth | 100kHz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LT6105HMS8#PBF Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. A Current Sense-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. The number of terminations approaches 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 12V battery. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . During the manufacturing process, this buffer amplifier is divided into 1 circuits. We recommend that you use this electronic part with an 300μA supply in order to get the best performance from it. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
LT6105HMS8#PBF Features
8 Pins
supply voltage of 12V
LT6105HMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6105HMS8#PBF Instrumentational OP Amps applications.
- Multimedia playback equipment
- Mobile phone
- Blood pressure sensors
- Large motor controllers
- Logarithmic operation circuits
- High input resistance broadband
- Power generator
- Digital cameras
- Computer workstations
- Television broadcasting equipment
