LT6200CS6-10#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6200 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 20mA |
| Supply Current-Max | 29mA |
| Slew Rate | 450V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Buffer |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 23μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 1.6GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1600000 kHz |
| Voltage Gain | 101.58dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2.5mV |
| Low-Bias | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.45 GHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
LT6200CS6-10#TRMPBF Overview
In the package, you will find a SOT-23-6 Thin, TSOT-23-6-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 6. Buffer amplifier has a total of 6 pins. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 6 pins on this chip. Regarding input offset voltage, buffer amplifier rates 1mV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Using a supply current of 20mA , this buffer op amp will be able to operate. Keeping the voltage gain at 101.58dB is the best course of action. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. It is possible to count 1 elements on this buffer amplifier. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
LT6200CS6-10#TRMPBF Features
6 Pins
supply voltage of 5V
101.58dB voltage gain
Output Type: Rail-to-Rail
LT6200CS6-10#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT6200CS6-10#TRMPBF Instrumentational OP Amps applications.
- Thermocouples
- Multiplication circuits
- Communication device
- Signal filtering
- E-book readers
- Fission chambers
- Radiation thermometry transducers
- MP3
- Signal amplification
- Fast A/D and D/A converters
