LT6200CS8-10#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 20mA |
| Slew Rate | 450 V/μs |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 23μA |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1.6 GHz |
| Gain Bandwidth Product | 1.45 GHz |
| Voltage Gain | 101.58dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.25V |
| Nominal Gain Bandwidth Product | 1.45 GHz |
| Number of Amplifiers | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT6200CS8-10#PBF Overview
The linear amplifier is packaged in a SOIC case. Linear amplifier includes 8 pins. The input offset voltage is 1mV. As long as the supply current of the chip does not exceed 20mA, this op amp ic can operate. You should keep the voltage gain at 101.58dB for the time being. On this buffer amplifier, there are 1 circuits. 1 channels are available on the instrumentation amplifier. The temperature should not be lower than 0°C for operational amplifier ics to operate. At temperatures greater than 70°C, Instrumentation amplifier should not be used. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 12.6V, and this is an excellent feature. Keeping the linear amplifier's supply voltage above 2.5V is recommended. You should conduct this electronic component under the dual supply voltage of 6.3V. A total of 1 instrumentation amplifiers are present on the device.
LT6200CS8-10#PBF Features
101.58dB voltage gain
LT6200CS8-10#PBF Applications
There are a lot of Analog Devices, Inc. LT6200CS8-10#PBF Instrumentational OP Amps applications.
- Power control
- Hand-held batteries
- Measurements of Wheatstone bridge
- Video conversion and routing
- Automatic control
- Car stereo
- Laptop
- Inverse/same-phase proportional circuit
- Power transmission
- Signal filtering
