LT6200IS6-10#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6200 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 20mA |
| Supply Current-Max | 29mA |
| Slew Rate | 450V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Buffer |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 23μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 1.6GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1600000 kHz |
| Voltage Gain | 101.58dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2.5mV |
| Low-Bias | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.45 GHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6200IS6-10#TRMPBF Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 Thin, TSOT-23-6 case. Buffer amps of this type are called Buffer-types. Linear amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 6 terminations. In total, there are 6 pins on this op amp ic. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 6 pins that make up the linear amplifier. The input offset voltage is 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using a supply current of 20mA , this buffer op amp will be able to operate. Op amp is a member of the 101.58dB's 101.58dB family. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 1. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
LT6200IS6-10#TRMPBF Features
6 Pins
supply voltage of 5V
101.58dB voltage gain
Output Type: Rail-to-Rail
LT6200IS6-10#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT6200IS6-10#TRMPBF Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Industrial applications including automation
- Proportional operation circuits
- pH (acidity)
- Voltage regulation circuit
- Oscilloscopes
- Band-stop filter
- Non-polarized electrodes
- Subtraction operation circuits
- earphone
