LT6200IS8-10#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6200 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 20mA |
| Supply Current-Max | 29mA |
| Slew Rate | 450V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Buffer |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 23μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 1.6GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1600000 kHz |
| Voltage Gain | 101.58dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2.5mV |
| Low-Bias | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 1.45 GHz |
| Wideband | YES |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6200IS8-10#PBF Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A Buffer-type buffer amplifier is shown here. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 1mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 20mA . Maintain 101.58dB as the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1.
LT6200IS8-10#PBF Features
8 Pins
supply voltage of 5V
101.58dB voltage gain
Output Type: Rail-to-Rail
LT6200IS8-10#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6200IS8-10#PBF Instrumentational OP Amps applications.
- Signal amplification
- Large motor controllers
- Professional videography
- Video data acquisition
- Radar
- Home audio systems
- Navigation
- Band-stop filter
- Fast A/D and D/A converters
- Hand-held batteries
