LT6200IS8-5#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6200 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 20mA |
| Supply Current-Max | 29mA |
| Slew Rate | 250V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Buffer |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 23μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 800MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 800000 kHz |
| Voltage Gain | 101.58dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2.5mV |
| Low-Bias | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 165MHz |
| Wideband | YES |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6200IS8-5#PBF Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the Buffer type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 1mV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. A supply current of 20mA can be used to operate this linear amplifier. Maintain 101.58dB as the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1.
LT6200IS8-5#PBF Features
8 Pins
supply voltage of 5V
101.58dB voltage gain
Output Type: Rail-to-Rail
LT6200IS8-5#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6200IS8-5#PBF Instrumentational OP Amps applications.
- Video computer boards
- RF cable systems
- Power control
- MP3
- Test equipment
- Inverse/same-phase proportional circuit
- Power generator
- single/dual op amp sum and difference circuits
- Commercial audio systems
- Power transmission
