LT6202IS5#TRMPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Package / Case | TSOT |
| Surface Mount | YES |
| Number of Pins | 5 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 2.8mA |
| Slew Rate | 25 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 3.8μA |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 90000 kHz |
| Voltage Gain | 96.9dB |
| Average Bias Current-Max (IIB) | 3.6μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.25V |
| Nominal Gain Bandwidth Product | 100MHz |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT6202IS5#TRMPBF Overview
There is a TSOT case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 5 pins. Op amp ic rates 500μV for input offset voltage. Using a supply current of 2.8mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. A instrumentation amplifier like this has 1 circuits. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 85°C, Instrumentation amplifier should not be used. I would like to point out that this electrical component is capable of working from a voltage below 12.6V as far as the power supply is concerned. A high supply voltage of more than 2.5V is recommended for the instrumentation amplifier's supply voltage. In order to conduct this part, you will need to provide dual supply voltages of 6.3V volts.
LT6202IS5#TRMPBF Features
5 Pins
supply voltage of 5V
96.9dB voltage gain
LT6202IS5#TRMPBF Applications
There are a lot of Analog Devices, Inc. LT6202IS5#TRMPBF Instrumentational OP Amps applications.
- Video computer boards
- Signal operation
- Gaming industry
- Tablets
- Television broadcasting equipment
- Radiation thermometry transducers
- Power generator
- Measurements of Wheatstone bridge
- Voltage regulation circuit
- Navigation
