LT6202IS8

1 Channels 40mA per Channel 3.8μA 60 dB Instrumentational OP Amps SOIC

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6202IS8
Package: SOIC
Datasheet: PDF
Stock: 382
Description: 1 Channels 40mA per Channel 3.8μA 60 dB Instrumentational OP Amps SOIC(Kg)

Details

Tags

Parameters
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	12.6V
Min Supply Voltage	2.5V
Operating Supply Current	2.8mA
Slew Rate	25 V/μs
Common Mode Rejection Ratio	60 dB
Current - Input Bias	3.8μA
Output Current per Channel	40mA
Input Offset Voltage (Vos)	500μV
Gain Bandwidth Product	90MHz
Voltage Gain	96.9dB
Power Supply Rejection Ratio (PSRR)	60dB
Max Dual Supply Voltage	6.3V
Min Dual Supply Voltage	1.25V
Nominal Gain Bandwidth Product	100MHz
RoHS Status	RoHS Compliant
Lead Free	Contains Lead
Package / Case	SOIC
Number of Pins	8
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	1

LT6202IS8 Overview

The linear amplifier is packaged in a SOIC case. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 500μV. The buffer amplifier is capable of operating from a supply current of 2.8mA . Op amp is a member of the 96.9dB's 96.9dB family. On this buffer amplifier, there are 1 circuits. The op amp ic has 1 channels on it. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. At temperatures greater than 85°C, op amp should not be used. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.6V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5V when using it. This electrical part should be conducted under the dual supply voltage of 6.3V volts when you conduct this part.