LT6202IS8#PBF

1 Channels 40mA per Channel 3.8μA 60 dB Instrumentational OP Amps 3V SO

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6202IS8#PBF
Package: SO
Datasheet: PDF
Stock: 887
Description: 1 Channels 40mA per Channel 3.8μA 60 dB Instrumentational OP Amps 3V SO(Kg)

Details

Tags

Parameters
Gain Bandwidth Product	90MHz
Voltage Gain	96.9dB
Power Supply Rejection Ratio (PSRR)	60dB
Max Dual Supply Voltage	6.3V
Min Dual Supply Voltage	1.25V
Dual Supply Voltage	3V
Nominal Gain Bandwidth Product	100MHz
Height	1.5mm
Length	5mm
Width	3.99mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	SO
Number of Pins	8
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Operating Supply Voltage	3V
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	12.6V
Min Supply Voltage	2.5V
Operating Supply Current	2.8mA
Max Supply Current	3mA
Slew Rate	25 V/μs
Common Mode Rejection Ratio	60 dB
Current - Input Bias	3.8μA
Output Current per Channel	40mA
Input Offset Voltage (Vos)	500μV

LT6202IS8#PBF Overview

Op amp is packaged in SO case. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. As long as the supply current of the chip does not exceed 2.8mA, this op amp ic can operate. Voltage gain should remain at 96.9dB. On this buffer amplifier, there are 1 circuits. Instrumentation amplifier has 1 channels on it. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. Use op amps only at temperatures no higher than 85°C. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. It is important to keep in mind that the power supply voltage of this electric component is below 12.6V, which is suitable. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5V when using it. As a general rule, you should conduct this electronic component under dual supply voltages of 6.3V volts.