LT6203CMS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 2.8mA |
| Max Supply Current | 6mA |
| Slew Rate | 25 V/μs |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 3.8μA |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 90MHz |
| Voltage Gain | 96.9dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.25V |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 100MHz |
| Number of Amplifiers | 2 |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT6203CMS8#PBF Overview
Packaging for the buffer amplifier is in the form of a MSOP case. 8 pins are located on the operational amplifiers. Op amp ic rates 500μV for input offset voltage. This op amp can operate from a supply current at 2.8mA. There should be no change in the voltage gain. This op amp contains 2 circuits. There are 2 channels on the operational amplifiers. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. Instrumentation amplifier shouldn't be used above 85°C . There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 3V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.6V. Keeping the linear amplifier's supply voltage above 2.5V is recommended. This electronic part should be conducted with a dual supply voltage of 6.3V volts for this part. The buffer amplifier consists of 2 amplifiers.
LT6203CMS8#PBF Features
96.9dB voltage gain
LT6203CMS8#PBF Applications
There are a lot of Analog Devices, Inc. LT6203CMS8#PBF Instrumentational OP Amps applications.
- Proportional operation circuits
- Power control
- MP3
- Navigation
- Industrial control system
- Television
- Automotive sensors
- Weak signal detection
- Power generator
- Computer workstations
