LT6203IS8#PBF
| Parameters | |
|---|---|
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2.6mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 100MHz |
| Wideband | YES |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6203 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5/+-5V |
| Number of Circuits | 2 |
| Operating Supply Current | 2.8mA |
| Supply Current-Max | 9mA |
| Slew Rate | 25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 3.8μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 90000 kHz |
| Voltage Gain | 96.9dB |
| Average Bias Current-Max (IIB) | 3.6μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
LT6203IS8#PBF Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 500μV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 2.8mA , this buffer op amp will be able to operate. Maintain 96.9dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. As a whole, there are 2 elements that make up this buffer amplifier.
LT6203IS8#PBF Features
8 Pins
supply voltage of 5V
96.9dB voltage gain
Output Type: Rail-to-Rail
LT6203IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6203IS8#PBF Instrumentational OP Amps applications.
- Information processing
- Signal transformation
- Computer workstations
- Signal operation
- Weak signal detection
- Commercial audio systems
- High-frequency data acquisition systems
- ECG equipment
- Power transmission
- earphone
