LT6204CGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LT6204 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 3/5/+-5V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.8mA |
| Supply Current-Max | 17.2mA |
| Slew Rate | 25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 3.8μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 95000 kHz |
| Voltage Gain | 96.9dB |
| Average Bias Current-Max (IIB) | 3.6μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2.6mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 100MHz |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6204CGN#PBF Overview
There is a 16-SSOP (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. A Tube case is used to deliver the buffer op amp. There have been a total of 16 terminations over the past year. The pins on this board total to 16 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 16 pins. The input offset voltage is 500μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges 0°C~70°C. This op amp can operate from a supply current at 2.8mA. 96.9dB should remain the voltage gain. This op amp ic has 4 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4.
LT6204CGN#PBF Features
16 Pins
supply voltage of 5V
96.9dB voltage gain
Output Type: Rail-to-Rail
LT6204CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6204CGN#PBF Instrumentational OP Amps applications.
- Navigation
- High-frequency data acquisition systems
- Biopotential
- Multiplication circuits
- ECG equipment
- Medical instruments
- High/low-pass filter circuit
- Power generator
- MP3
- Weighing systems
