LT6204IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LT6204 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 3/5/+-5V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.8mA |
| Supply Current-Max | 18mA |
| Slew Rate | 25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 3.8μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 90000 kHz |
| Voltage Gain | 96.9dB |
| Average Bias Current-Max (IIB) | 3.6μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2.6mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 100MHz |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6204IGN#PBF Overview
The linear amplifier is packaged in a 16-SSOP (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 16. It consists of a total of 16 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 16 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~85°C. Using an 2.8mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 96.9dB's 96.9dB family. There are 4 circuits on this op amp. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. A total of 4 elements are present in this linear amplifier.
LT6204IGN#PBF Features
16 Pins
supply voltage of 5V
96.9dB voltage gain
Output Type: Rail-to-Rail
LT6204IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6204IGN#PBF Instrumentational OP Amps applications.
- Gaming industry
- Portable media players
- Differentiator circuits
- Switching amplifier
- Radar
- Automatic control
- Fission chambers
- Signal transformation
- Video amplifiers
- Signal operation
