banner_page

LT6205CS5#TRPBF

1 Channels 60mA per Channel 30μA 78 dB Instrumentational OP Amps SOT-23-5


  • Manufacturer: Analog Devices, Inc.
  • Nocochips NO: 84-LT6205CS5#TRPBF
  • Package: SOT-23-5
  • Datasheet: PDF
  • Stock: 126
  • Description: 1 Channels 60mA per Channel 30μA 78 dB Instrumentational OP Amps SOT-23-5(Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Package / Case SOT-23-5
Number of Pins 5
Packaging Tape & Reel (TR)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Number of Elements 1
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 12.6V
Min Supply Voltage 3V
Operating Supply Current 4mA
Slew Rate 600 V/μs
Common Mode Rejection Ratio 78 dB
Current - Input Bias 30μA
Output Current per Channel 60mA
Input Offset Voltage (Vos) 4.5mV
Gain Bandwidth Product 100MHz
Voltage Gain 100dB
Power Supply Rejection Ratio (PSRR) 67dB
Max Dual Supply Voltage 6.3V
Min Dual Supply Voltage 1.35V
Nominal Gain Bandwidth Product 100MHz
RoHS Status RoHS Compliant
Lead Free Lead Free

LT6205CS5#TRPBF Overview


Packaged in a SOT-23-5 case, the buffer op amp is ready to use. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It has 5 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 4.5mV. As long as the supply current of the chip does not exceed 4mA, this op amp ic can operate. Voltage gain should remain at 100dB. On this instrumentation amplifier, there are 1 circuits that are connected together. Op amp ic has 1 channels. It should not lower than 0°C to operate buffer amplifier. Instrumentation amplifier should only be used at temperatures up to 70°C. There are 1 elements in this buffer amplifier. I would like to point out that this electrical component is capable of working from a voltage below 12.6V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 3V at all times. There should be a dual supply voltage of 6.3V for you to conduct this electrical part.

LT6205CS5#TRPBF Features


100dB voltage gain

LT6205CS5#TRPBF Applications


There are a lot of Analog Devices, Inc. LT6205CS5#TRPBF Instrumentational OP Amps applications.

  • High gain DC amplifier
  • High speed sample
  • Television
  • Broadcasting
  • Proportional counter tubes
  • Radiation thermometry transducers
  • Differentiator circuits
  • Large motor controllers
  • earphone
  • Thermocouples

Write a review

Note: HTML is not translated!
    Bad           Good