LT6206IMS8#PBF
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LT6206 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Operating Supply Current | 4mA |
| Output Current | 25mA |
| Slew Rate | 600V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~12.6V ±1.35V~6.3V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 67dB |
| Supply Voltage Limit-Max | 6.3V |
| Input Bias Current | 30μA |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 100MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
LT6206IMS8#PBF Overview
A Tube is used to package class d amplifier.Due to space constraints, class d amp's available in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).It is a very good choice for Voltage Feedback due to its high performance.Based on Surface Mount, audio power amplifier is mounted on the PCB.Audio amp can be located using its base part number LT6206.A pin count of 8 is present on this amplifier.A total of 8 terminations are present.Operational Amplifier includes this audio power amplifier.A supply current of 4mA is required to operate the amplifier.In this case, there are 8 pins used in amplifier ics construction.It is recommended to operate at a temperature below 85°C.It is recommended that the operating temperature be at least -40°C.Presently, there are a total of 2 channels that are available to users.With a 5V supply voltage, high efficiency can be achieved.This audio amplifier has a type of amplifier of OPERATIONAL AMPLIFIER.This scenario has a current output of 25mA.There is 100dB voltage gain in the audio amplifier ic.
LT6206IMS8#PBF Features
Operational Amplifier subcategory
8 pins
2 channels
LT6206IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6206IMS8#PBF Video Amps and Modules applications.
- Analog and Digital Mixing Consoles
- Audio Test And Measurement
- Broadcast Studio Equipment
- Aftermarket telematics
- Premium Audio
- Preamplification and Filtering
- Professional Audio Equipment
- Body Control Modules
- Audio Test and Measurement
- Emergency call (eCall)
