LT6220IS5#TRMPBF

1 Channels 50mA per Channel 600nA 85 dB Instrumentational OP Amps TSOT

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6220IS5#TRMPBF
Package: TSOT
Datasheet: PDF
Stock: 467
Description: 1 Channels 50mA per Channel 600nA 85 dB Instrumentational OP Amps TSOT(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Package / Case	TSOT
Number of Pins	5
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	12.6V
Min Supply Voltage	2.2V
Operating Supply Current	1mA
Slew Rate	20 V/μs
Common Mode Rejection Ratio	85 dB
Current - Input Bias	600nA
Output Current per Channel	50mA
Input Offset Voltage (Vos)	350μV
Bandwidth	60MHz
Gain Bandwidth Product	60MHz
Voltage Gain	100dB
Power Supply Rejection Ratio (PSRR)	84dB
Max Dual Supply Voltage	6.3V
Min Dual Supply Voltage	1.1V
Nominal Gain Bandwidth Product	60MHz
Height	900μm
Length	2.9mm
Width	1.75mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT6220IS5#TRMPBF Overview

Op amp is packaged in TSOT case. In total, the buffer amplifier consists of 5 pins. There is an input offset voltage of 350μV for this buffer op amp. This op amp can operate from a supply current at 1mA. Keeping the voltage gain at 100dB is the best course of action. On this buffer amplifier, there are 1 circuits. There are a total of 1 channels available on the op amps. The temperature should not be lower than -40°C for operational amplifier ics to operate. Linear amplifier shouldn't be used above 85°C degrees. There are 1 elements in this buffer amplifier. I would like to point out that this electrical component is capable of working from a voltage below 12.6V as far as the power supply is concerned. The linear amplifier's supply voltage should be higher than 2.2V. In order to conduct this part, you will need to provide dual supply voltages of 6.3V volts.