LT6220IS8#PBF
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LT6220 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 1mA |
| Slew Rate | 20V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 250nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~12.6V ±1.1V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 700μV |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 60MHz |
| Length | 4.9025mm |
LT6220IS8#PBF Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 8 pins. Op amp rates 350μV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 1mA . It is a member of the 100dB's 100dB family. On this buffer amplifier, there are 1 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. 1 elements make up the design of this buffer amplifier.
LT6220IS8#PBF Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LT6220IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6220IS8#PBF Instrumentational OP Amps applications.
- RF cable systems
- Power control
- High/low-pass filter circuit
- Multimedia playback equipment
- single/dual op amp sum and difference circuits
- Video computer boards
- Video conversion and routing
- Mobile phone
- Proportional counter tubes
- MP3
