LT6221CS8#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.2V |
| Operating Supply Current | 1mA |
| Slew Rate | 20 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 250nA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 60000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.1V |
| Nominal Gain Bandwidth Product | 60MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT6221CS8#TRPBF Overview
A SOIC case is used to package the op amp. This is a OPERATIONAL AMPLIFIER type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 350μV. An 1mA volt supply current is needed for this linear amplifier to operate. 100dB should be the voltage gain. For this linear amplifier to work, the temperature should not be below 0°C. You should only use instrumentation amplifier at temperatures that are no higher than 70°C. A voltage rating of 2 is indicated for the op amp's operating supply voltage. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.6V. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.2V. This electrical part should be conducted under the dual supply voltage of 6.3V volts when you conduct this part.
LT6221CS8#TRPBF Features
8 Pins
supply voltage of 5V
100dB voltage gain
LT6221CS8#TRPBF Applications
There are a lot of Analog Devices, Inc. LT6221CS8#TRPBF Instrumentational OP Amps applications.
- Image computer boards
- Signal filtering
- Gaming industry
- Proportional counter tubes
- Semiconductor detectors
- Measurements of Wheatstone bridge
- Mobile phone
- single/dual op amp sum and difference circuits
- Home audio systems
- Thermocouples
