LT6221IDD#PBF
| Parameters | |
|---|---|
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Dual Supply Voltage | 3V |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6221 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Operating Supply Current | 1mA |
| Max Supply Current | 2mA |
| Slew Rate | 20V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 250nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~12.6V ±1.1V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 700μV |
| Bandwidth | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 50000 kHz |
LT6221IDD#PBF Overview
The linear amplifier is packaged in a 8-WFDFN Exposed Pad case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are located on the operational amplifiers. Op amp rates 700μV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. This op amp can operate from a supply current at 1mA. It is recommended to keep the voltage gain at 100dB at all times. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of instrumentation amplifier is rated 3V voltage.
LT6221IDD#PBF Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LT6221IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6221IDD#PBF Instrumentational OP Amps applications.
- Communication
- Signal operation
- Signal amplification
- Strain gauges
- Large motor controllers
- Tablets
- Video computer boards
- High speed sample
- Switching amplifier
- Radar
