LT6222CGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6222 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 12V |
| Number of Elements | 4 |
| Operating Supply Current | 1mA |
| Slew Rate | 20V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 250nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~12.6V ±1.1V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 700μV |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 60MHz |
| Height | 1.5mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6222CGN#PBF Overview
The linear amplifier is packaged in a 16-SSOP (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. A Tube case is used for delivering the op amp. In recent months, the number of terminations has approached 16. Buffer amplifier has a total of 16 pins. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 16 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 350μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 1mA . There should be no change in the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. The operating supply voltage of instrumentation amplifier is rated 12V voltage.
LT6222CGN#PBF Features
16 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LT6222CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6222CGN#PBF Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Addition operation circuits
- Weighing systems
- Biopotential
- Non-polarized electrodes
- Displayers for aircraft and air transportation control systems
- Proportional operation circuits
- Proportional counter tubes
- Laptop
- Comparator
