LT6230CS6-10#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6230 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3.3/5+-5V |
| Number of Channels | 1 |
| Operating Supply Current | 3.3mA |
| Slew Rate | 320V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12.6V ±1.5V~6.3V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.45 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1450000 kHz |
| Voltage Gain | 106.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.45 GHz |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6230CS6-10#TRMPBF Overview
In the package, you will find a SOT-23-6 Thin, TSOT-23-6-case to contain the op amp ic. An op amp of this type is a General Purpose-type. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. A total of 6 terminations have been reported in the past few weeks. Linear amplifier has a total of 6 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 6 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 3.3mA . 106.02dB should remain the voltage gain. There are 1 channels on the operational amplifiers. On the output type, there are Rail-to-Rail different types of op amps. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
LT6230CS6-10#TRMPBF Features
6 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
LT6230CS6-10#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT6230CS6-10#TRMPBF Instrumentational OP Amps applications.
- Band-pass filter
- Comparator
- Hand-held batteries
- Power generator
- Thermocouples
- Communication device
- Active probe
- Industrial control system
- Home audio systems
- Weighing systems
