LT6230IS6#TRMPBF

1 Channels 30mA per Channel 5μA 90 dB Instrumentational OP Amps 5V SOT-23-6

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6230IS6#TRMPBF
Package: SOT-23-6
Datasheet: PDF
Stock: 732
Description: 1 Channels 30mA per Channel 5μA 90 dB Instrumentational OP Amps 5V SOT-23-6(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Package / Case	SOT-23-6
Number of Pins	6
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Operating Supply Voltage	5V
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	12.6V
Min Supply Voltage	3V
Operating Supply Current	3.3mA
Slew Rate	70 V/μs
Common Mode Rejection Ratio	90 dB
Current - Input Bias	5μA
Output Current per Channel	30mA
Input Offset Voltage (Vos)	500μV
Bandwidth	1.45 GHz
Gain Bandwidth Product	200MHz
Voltage Gain	106.02dB
Power Supply Rejection Ratio (PSRR)	90dB
Max Dual Supply Voltage	6.3V
Min Dual Supply Voltage	1.5V
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	215MHz
Height	900μm
Length	2.9mm
Width	1.75mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT6230IS6#TRMPBF Overview

Packaged in a SOT-23-6 case, the buffer op amp is ready to use. 6 pins are included on the operational amplifiers. Op amp rates 500μV as input offset voltage. Using an 3.3mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 106.02dB. The buffer amp consists of 1 circuits in total. There are 1 channels on the operational amplifiers. Using this buffer op amp requires a temperature of at least -40°C. At temperatures greater than 85°C, Instrumentation amplifier should not be used. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 12.6V, and this is an excellent feature. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage. You should conduct this electronic component under the dual supply voltage of 6.3V.